Enjoy improved handling as you lower the rear of your car with the new rear lowering blocks!
When fine tuning your suspension, if you have fitted uprated and lowered front springs then you will need to lower the rear ride height to compensate. Made of aluminum alloy, these lowering blocks will lower the car based on the size of the block as well as enhance your car's appearance. Made from the highest quality material and CNC machined from billet to the tightest tolerances, the blocks also offer positive location to your spring/diff case. Available in three sizes, tailor your car's handling to your liking:
-Your Spitfire would benefit from a 1/2" spacer under a new or recently fitted rear spring.
-A 3/4" spacer would benefit those cars fitted with 330lb+/1" lower front springs fitted.
-A 1" spacer is really best for Spitfires that frequent the track.
Please Note:
-Adding these spacer blocks will increase the negative camber on the rear.
-We highly recommend that you replace the spring mount studs. The 3/4" and 1" blocks will require a longer stud now available under part # 683-403, and a standard size replacement stud is available under 318-005.
The Longest in the Business
- All Classic British products are warrantied to be free from defects in material and workmanship for 2 years from the date of invoice.
- All superchargers, supercharger components, and supercharger hardware are warranted to be free from defects in material and workmanship for 1 year from date of invoice.
- 91制片厂. will, at its discretion, repair or replace any part that fails in service within the warranty period. This warranty does not cover labor, failure of related components, normal wear of brake or clutch components or failure resulting from alteration, misuse, accidental damage, faulty installation, or faulty repair.
- Warranty requests should be submitted to our sales department and must be supported by the original Moss Motors purchase invoice and documentation of the failure.